Brushed Impressions
Limed Natural Light 5 in
White Oak Engineered Hardwood
# EBKBI53L401W
5 in Wide x 3/8 in Thick
Low Gloss
How to Get Samples?
Please check with your local retailer for Bruce flooring samples.
- Visit our Where to Buy page to find a retailer near you.
- Call or visit the retailer using the phone number or address provided.
- The retailer will ask you for a product number. This product's number is: # EBKBI53L401W.
Specifications
Product Design & Construction
| Collection | Brushed Impressions |
|---|---|
| Surface Texture Describes the surface look and feel of flooring. Textures can range from smooth to hand-scraped and distressed. | Wire Brushed |
| Construction | Engineered Hardwood |
| Color | Limed Natural Light (Tan) |
| Species | White Oak |
| GlossDescribes the coating that adds a polished look to the floor’s surface. You can choose products with a high, medium or low gloss level. | Low Gloss |
| Finish | Dura-Luster Plus Urethane |
| Edge/End ShapeDescribes the way the hardwood board edges and ends are cut. Edges and ends are typically described as square, micro, micro-beveled (eased), scraped and pillowed. | Micro Edge / Micro Ends |
| Performance Class | Better |
| Wood HardnessThe density/hardness of the wood species and its ability to withstand foot traffic, children and pets will impact its wear performance, and will vary from species to species. Strong, resilient Oak is used as the industry benchmark. The hardness scale shows the relative hardness of this wood species. |  |
| Plank-To-Plank VariationWood is a natural material that features changes in color and tone. The board-to-board color variation is more pronounced in some species, less in others. If you like the look of contrasting light and dark tones, select a species that offers most color variation. If you prefer consistent color from board to board, choose the least color variation. |  |
Product Dimensions
| Plank Width | 5 in |
|---|---|
| Plank Length | Varying Lengths: 23.6 - 70.9 in |
| Plank Thickness | 3/8 in |
| SQ. FT. Per Box | 39.37 |
Warranty
-
Residential
25 years
Installation
Where Can I Install This Floor?
Installation Methods
Boards are glued together and float on top of the subfloor. An underlayment pad is rolled out over the subfloor to protect against moisture and improve sound transmission.
Adhesive is spread onto the subfloor using a trowel. Hardwood is then placed into the adhesive.
Hardwood flooring is mechanically fastened to the wood subfloor using staples, cleats or nails. This is the most popular and economical installation method.
Can I Do This Myself?
Planning ahead is essential for a successful hardwood installation. Follow these tips before, during and after installation to help you make the right decisions.
Read ArticleFloor Care
The following products are recommended to properly care for your new White Oak Engineered Hardwood floor.
Trims & Moldings
Complete your floor with coordinating trim and molding, the essential finishing touch to your flooring project.
Note: Colors used in the images below may not represent true product color