Laminate - Frequently Asked Questions

 

Where can I purchase Bruce Laminate flooring?
Click here to find a store near you.

How can I get a brochure on Bruce Laminate flooring?
Click here to request a laminate flooring brochure.

Where can I get a copy of the warranty for my Bruce Laminate flooring?
Click here for the Warranty section.

Is my Bruce Laminate warranty transferable?
No, the warranty is good only for the original purchaser.

If my question is not listed here, how can I get an answer?
Click here to Contact Bruce Laminate Floors, or call 1 800 233-3823.


LAMINATE FLOOR INSTALLATION


Does laminate flooring need to be acclimated?
No. Bruce Laminate flooring does not require acclimation.

Is the 2 in 1 underlayment needed if there is a foam already attached to the backing?
No. Additional underlayment is not recommended. However, if installing over concrete you must use the moisture barrier sheeting.

How is Bruce Laminate flooring installed?
Click here for laminate floor installation instructions.

Where can laminate flooring be installed?
You can install Bruce Laminate flooring over virtually any existing floor -- wood, and wood underlayment, concrete, ceramic and resilient tile, vinyl sheet flooring, even carpet, if it's fully adhered to a wood subfloor, and no more than 1/4" thick. That means you don't have to pull up old floors and deal with the mess or the hassle of repairing most subfloor damage. Just make sure your subfloor is structurally sound, dry, clean and flat.

I'm a DIY'er. Can I install laminate flooring myself?
Yes. Laminate floor installation instructions are printed on the back of every carton of laminate flooring. You can also click here for laminate floor installation instructions.

What is the Bruce Lock Installation System?
The Bruce Lock installation system requires no glue* and can be installed over most existing floors. Each piece aligns automatically, with the tightest fit that gives a virtually seamless appearance. The locking installation requires no waiting time before moving appliances or furniture back on the floor. And furthermore, there's no messy glue residue or fumes.

*Except full bathroom installations.

How do I determine the direction in which to install my laminate flooring?
To decide where to begin the layout of your laminate floor, consider incoming light. It is usually best to install Bruce Laminate Flooring with the planks running parallel to light coming in windows or glass doors. For any installation, the starting wall should be long, and as straight as possible.

Can laminate flooring be installed on stairs?
Yes. You'll need to fully adhere the flooring to the stairs without using foam underlayment and follow the special installation instructions for stair installations.

How do I know which molding pieces I need to use, and where?
Bruce provides a line of Coordinated Transition pieces that have been styled to coordinate with each of the flooring designs. Quarter round moldings finish the space where the laminate flooring meets the wall. Multi-purpose reducer finishes the space between the laminate flooring and other flooring surfaces of lesser height including around sliding glass doors, toe kicks or carpet. T-Molding is used in doorways or entryways, finishes the space between two pieces of laminate flooring, or is used when your room is longer than 40 ft. or wider than 26 ft. Baby threshold is used at sliding glass doors, along wall bases, door thresholds and carpet. Reducer strips are used to make the transition from Bruce laminate flooring to another type of flooring such as vinyl. Flush stair nose finished the flooring edge at staircases, step downs and landings. Overlap step nose is used where the flooring meets a step down or landing. Wall base is the classic finish to your laminate floor and is used wherever the wall and flooring meet.


LAMINATE FLOORING CLEANING & MAINTENANCE


What type of rugs can I use?
All types of rugs are fine for laminate. Be sure that the mat is colorfast and non-staining.

How should I clean and maintain my laminate floor?
Go to Maintenance & Care for detailed instructions on how to clean your laminate floor with Bruce Dura-Luster No-Wax Floor Cleaner. It’s a specially formulated no-rinse cleaner that allows you to just squirt and mop.

Where can I buy Bruce Dura Luster No-Wax floor cleaner?
Click to find a store near you.


If I damage my floor, can it be repaired?
While Bruce Laminate flooring is durable, no floor is indestructible. You can easily make minor nicks or scratches disappear with the correct color-matched Laminate Floor Touch-Up Kit. Look for it at flooring retailers. For major repairs, we suggest you contract a professional.

Can laminate flooring be refinished?
No.