Find a Retailer +
Overview | |
---|---|
Category | Floors |
Flooring Type | Hardwood |
Product Number | C216 |
Collection |
Manchester Strip & Plank
|
Species | Red Oak |
Performance Class | Better |
Warranty ![]() |
Residential Warranty: 35 Years |
Construction |
Solid Hardwood
|
Length | Varying Lengths: 8 1/4 - 84 in. |
Width | 2 1/4 in. |
Thickness |
3/4 in. |
Look | |
Finish | Dura-Luster Plus Urethane |
Gloss | High Gloss |
Edge Type | Micro Edge / Square Ends |
Measurement | |
Sq. Foot Per Carton | 20 |
Installation | |
Installation Location | On/Above Ground Level |
Installation Method | Nail |
DIY Level | Experienced |
Overview
Product Details
Trims and Moldings
Online Tools
Overview | |
---|---|
Category | Floors |
Flooring Type | Hardwood |
Product Number | C216 |
Collection |
Manchester Strip & Plank
|
Species | Red Oak |
Performance Class | Better |
Warranty ![]() |
Residential Warranty: 35 Years |
Construction |
Solid Hardwood
|
Length | Varying Lengths: 8 1/4 - 84 in. |
Width | 2 1/4 in. |
Thickness |
3/4 in. |

Find a Store
Look | |
---|---|
Design/Texture | Traditional Finish |
Finish | Dura-Luster Plus Urethane |
Gloss | High Gloss |
Edge Type | Micro Edge / Square Ends |
Measurement | |
Sq. Foot Per Carton | 20 |
Installation | |
Installation Location | On/Above Ground Level |
Installation Method | Nail |
DIY Level | Experienced |
Product Classification | |
![]() |
Board-to-Board Color Variation Wood is a natural material that features changes in color and tone. The board-to-board color variation is more pronounced in some species, less in others. If you like the look of contrasting light and dark tones, select a species that offers most color variation. If you prefer consistent color from board to board, choose the least color variation. |
![]() |
Hardness Scale The density/hardness of the wood species and its ability to withstand foot traffic, children and pets will impact its wear performance, and will vary from species to species. Strong, resilient Oak is used as the industry benchmark. The hardness scale shown to the left shows the relative hardness of this wood species. |

Find a Store
Trims and Moldings | |
---|---|
Combination Base & Shoe T7726 A molding used when a base is desired. Used to cover expansion space between the floor and the wall. Pre-drill and nail into the wall, not the floor. |
|
![]() |
Quarter Round T7426S A molding used to cover expansion space next to baseboards, case goods, and stairs steps. Pre-drill and nail to the vertical surface, not to the floor. |
![]() |
Reducer Strip T7226 A teardrop shaped molding used around fireplaces, doorways, as a room divider, or as a transition between wood flooring and adjacent floor coverings that are less thick. Fasten down with adhesive, small nails or double-faced tape. |
![]() |
Stair Nose T7326 A molding undercut for use as a stair landings trim, elevated floor perimeters, and stair steps. Fasten down firmly with adhesive and nails or screws. Pre-drill nail holes to prevent splitting. |
![]() |
T-Molding TMSROBC6045 A molding used as a transition piece from one flooring to another of equal height or to gain expansion spaces. Fasten at the heel in the center of the molding. Additional support may need to be added to the heel of the molding dependent upon the thickness of the goods covered. |
![]() |
Threshold T9726S A molding undercut used against sliding door tracks, fireplaces, carpet, ceramic tile, or existing thresholds to allow for expansion space and to provide a smooth transition in height difference. Fasten to subfloor with adhesive and/or nails through the heel. Pre-drill nail holes to prevent splitting. |

Find a Store
Online Tools | |
---|---|
Access these helpful tools on the Armstrong Flooring website to learn more about your preferred flooring choice. | |

Find a Store